800.354.8556
+1 503.598.4564
  Search
Veris Industries
 
Order Summary

There are no items in the cart.
 
Onesource Rewards
Not logged-in or not enrolled in
Veris OSR.

Click here to Log In, or Click here for information about the Veris OSR program.
Customers also ordered
HT2XAS0B
Get analog feedback for user selcted setpoint requests
HWLPHTX3
HS2NX
Replace the element instead of the entire sensor if service is required
Home >

HWL3XSDHX2F

LCD, 10k ohm type 3 thermistor temp output, temperature transmitter provides LCD temp reading. 10K ohm set point slider.

HWL3XSDHX2F $504.68 EA
Quantity:



  • Overview
  • Series Specifications

HWL Deluxe humidity transmitters provide an ideal solution for measuring relative humidity in all conditions. All devices are equipped with a thin-film capacitive sensor that is easily replaceable in the field. The wall-mounted HW model features a low-profile housing with an LCD display for easy visibility. All Deluxe models come with an extended five-year warranty.

APPLICATIONS

  • Managing energy systems
  • Controlling HVAC systems for improved comfort and energy savings
  • Museums, schools, printing shops, and other locations requiring humidity control
  • Facilitating compliance with ASHRAE standards for environmental control and indoor air quality

Sense humidity in harsh environments

  • Thin-film polymer capacitive sensor element recovers from 100% saturation
  • Replace element in the field...maintain accuracy and minimize downtime

Easy Installation

  • Polarity insensitive analog output...flexible systems compatibity...save time in the field, and stock fewer devices

Calibration-free interchangeable NIST traceable HS element

  • HS element is microprocessor profiled with on-board nonvolatile memory
  • Minimizes field calibration downtime
  • HS Element Digitally profiled thin-film capacitive (32 bit mathematics) U.S. Patent 5,844,138
  • Accuracy at 25°C from 10-80% ±1% at 12-60% RH (Multi-point calibration, NIST traceable)
  • Reset Rate** 24 hours
  • Stability ±1% @ 20°C (68°F) annually, for two years
  • Operating Humidity Range 0 to 100% RH (non-condensing)
  • Hysteresis 1.5% typical
  • Linearity Included in accuracy spec.
  • Temperature Coefficient ±0.1% RH/°C above or below 25°C (typical)
  • Analog Output 4-20mA mode: 2-wire, polarity insensitive, (clipped and capped); 0-5V/0-10V mode: 3-wire, observe polarity
  • Scaling 0-100% RH
  • Operating Temperature Range 10° to 35°C (50° to 95°F)
  • Input Power*** 4-20mA mode: loop powered 12-30VDC only, 30mA max.; 0-5V/0-10V mode: 12-30VDC/24VAC, 15mA max.
  • Temperature Transmitter Output Digital, 4-20mA, (clipped and capped) or 0-5V/0-10V output; accuracy ±0.5°C (±1°F) typical


*Specified accuracy with 24VDC supplied power with rising humidity. RTD/Thermistors are not compensated for internal heating of product.**Reset Rate is the time required to recover to 50% RH after exposure to 90% RH for 24 hours.***One side of transformer secondary is connected to signal common, so an Isolation transformer or dedicated power supply may be required.Shielded cabling is required for conformance to EMC standards. Technical information is available from factory upon request or is available on our website: www.veris.com.