+1 503.598.4564
Veris Industries
Order Summary

There are no items in the cart.
Onesource Rewards
Not logged-in or not enrolled in
Veris OSR.

Click here to Log In, or Click here for information about the Veris OSR program.
Customers also ordered
Veris also offers control transformers
Home >


H6ECM05 $139.90 EA

  • Overview
  • Series Specifications

The H6ECM is a current-sensitive switching device that is optimized for most ECM motors.  It monitors the current (amperage) in the conductor passing through it to the ECM. A change in amperage in the monitored conductor that crosses the switch (setpoint) causes the resistance of the FET status output to change state, similar to the action of a mechanical switch.  When the ECM motor is externally signaled to stop shaft rotation,  the current in the monitiored conductor falls below the setpoint.  The current switch output changes and indicates the ECM status.

The status output is suitable for connection to building controllers or other appropriate data acquisition equipment operating at up to 30 volts. The product requires no external power supply to generate its output.

Sensor Power: Induced from the monitored conductor
Amperage Range: 0.5A to 175A continuous (monitored conductor)
Status Output Ratings:  N.O. 1.0A @ 30 VAC/DC, not polarity sensitive
Setpoint:  0.5A (ECM optimized)
Frequency Range:  60Hz only
Accuracy:  ±10%
Temperature Range:  -15° to 60°C (5° to 140°F)
Humidity Range: 10-90% RH non-condensing
Hysteresis: 10% typical
Off State Resistance: Open switch represents > 1M Ohm
On State Resistance:  Closed switch represents < 200m Ohm
Terminal Block Wire Size: 24 to 14 AWG (0.2 to 2.1 sq. mm)
Terminal Block Torque: 3.5 to 4.4 in-lbs (0.4 to 0.5N-m)
Agency Approvals:  UL508 open device listing
Insulation Class    600 VAC RMS
Installation Category: Cat. III, pollution degree 2