+1 503.598.4564
Veris Industries
Order Summary

There are no items in the cart.
Onesource Rewards
Not logged-in or not enrolled in
Veris OSR.

Click here to Log In, or Click here for information about the Veris OSR program.
Customers also ordered
CO2, RH, and Temp all in one sensor. Save install and product cost!
Economy CO2 sensor
CO sensor for permanent installation
Home >


LCD, 0-2000/0-5000ppm measurement range, 0-5VDC/0-10VDC/4-20mA selectable output, 2% humidity sensor, temperature transmitter: scaled 10 to 35°C (50 to 95°F). CE.

CDLSHTR $1,296.63 EA

  • Overview
  • Series Specifications

CDL carbon dioxide sensors maximize energy savings, while ensuring optimal ventilation. The sensors allow ventilation systems to be controlled by the amount of CO2 present in a space. The CDL Series detect fluctuations in CO2 levels and signal ventilation systems to provide an inlet of fresh air optimal for the space at a given time saving energy and ensuring tenant comfort.


  • Controlling ventilation in response to occupancy
  • Facilitating compliance with ASHRAE 62.1 standard for air quality
  • Office buildings, conference rooms, schools, retail stores, etc.

Microprocessor design increases accuracy and reduces installation time

  • Non-dispersive infrared technology (NDIR) repeatable to ±20 ppm ±1% of measured value
  • Innovative self-calibration algorithm...easy to maintain
  • 5-year calibration interval (recommended)
  • Low ambient sensitivity
  • Field-selectable outputs for operation flexibility

Revolutionary direct duct mounting design

  • Integrated transducer and probe...eliminates the need to install a separate pick-up tube
  • Snap-on faceplate...no screws required, making installation and service a snap
  • Adjustable duct probe...simplifies installation and airflow monitoring
  • CO2, humidity, and temperature sensing all in one compact device...fewer units to buy and install
    Series Specifications
  • Input Power 20 to 30VDC/24VAC; 100mA max.
  • Analog Output 4-20mA, (clipped & capped)/0-5VDC/0-10VDC (selectable)
  • Operating Temperature Range 0° to 50°C (32° to 122°F)
  • Housing Material High impact ABS plastic

CO2 Transmitter:

  • Sensor Type Non-dispersive infrared (NDIR), diffusion sampling
  • Measurement Range 0-2000/5000 ppm (programmable)
  • Accuracy ±30 ppm ±2% of measured value*
  • Repeatability ±20 ppm ±1% of measured value
  • Response Time <60 seconds for 90% step change

RH Transmitter:

  • HS Sensor Fully replaceable, digitally profiled thin-film capacitive (32-bit mathematics) U.S. Patent 5,844,138
  • Accuracy ±2% from 10 to 80% RH; NIST traceable multi-point calibration
  • Stability ±1% @ 20°C (68°F) annually, for two years
  • Operating Humidity Range 0 to 100% RH
  • Operating Temperature Range 10° to 35°C (50° to 95°F)
  • Temperature Coefficient ±0.1% RH/°C above or below 25°C (typical)

Temperature Transmitter:

  • Sensor Type Solid-state, integrated circuit
  • Accuracy ±0.5°C (±1°F) typical
  • Resolution 0.1°C (0.2°F)
  • Range 10° to 35°C (50° to 95°F)

Relay Contacts:

  • 1 Form C (SPDT) (on models without setpoint slider option) 1A@30VDC, resistive; 30W max.

RTD/Thermistors in wall packages are not compensated for internal heating of product.EMC Conformance: EN 61000-6-3:2001 Class B, EN 61000-6-1:2001, EN 61000-3-2:2000, EN 61000-3-3:2001, EMC Test Methods: CISPR 22:1997 (Amended A1:2000, A2:2002) Class B, IEC 61000-4-2:2002, IEC 61000-4-3:2006, IEC 61000-4-4:2004, IEC 61000-4-5:2001, IEC 61000-4-6:2004, IEC 61000-4-8:2001, IEC 61000-4-11:2004.EMC Special Note: Connect this product to a DC distribution network or an AC/DC power adaptor with proper SURGE PROTECTION (EN 61000-6-1:2001 specification requirements).*Measured at NTP