|
|
|
|
 |
AH Series
Accessories for Veris Current and Power Products
| AH01 |  DIN Rail
Mounting BracketsDIN Rail Clip set for Current Sensors—except H71x, H72x (O.K. on H72xLC/HC) models (H700/900DIN) |
| AH02 | Single Fuse Kit for Energy Meters | |
| AH03 | Dual Fuse Kit for Energy Meters | |
| AH04 | Triple Fuse Kit for Energy Meters | |
| AH05 | LCD Pulse Counter Display |
| AH06 |  CT Mounting
BracketsThese handy metal brackets make mounting Veris current transformers and H8000 series power meters easy (H8000MBKT). |
|
| AH07 |  Modbus
to RS-232 ConverterPowered by the PC serial port (H8900-2W485C) This device easily connects a PC serial port to a 2-wire RS-485 (Modus, etc.) network. With it, you can acquire data from devices connected to the network. |
|
| AH08 |  20
Turn CoilNeed to connect a Veris power meter to existing 5A CTs? Just connect the 5A CT leads to the crimp connections on this coil and slip it over the Veris CT on a 100A power meter. Dimensions: 1-1/2" ID 1" wide (H8000-20W) |
|
| AH09 | 60 Turn Coil for H8100 Series meters, similar to AH08 (H8000-60W) | |
| AH10 | Ground Bonding Kit for H500 Series Fractional HP motor controls | |
| AH11 | Ground Bonding Kit for H8100 Series Power Meters | |
| AH12 | Mounting "Ears" for H8100 Series Power Meters | |
| AH13 | Relay Snubber (TVS) | |
| AH14 | Phase Loss Relay - 208V | |
| AH15 | Phase Loss Relay - 480V | |
| AH16 | LCD Pulse Counter Display in a 2X box (H805X-KAL1B2X) | |
| AH17 | Dual LCD Pulse Counter Displays in a 2X box (H805X-KAL1B2X2) | |
| AH18 | Black nylon spacer | |
| AH19 | 600V kit for H84xxVB models only | |
| AH20 | Plate, H8238 mounting kit - hardware only | |
| AH21 | Plate, H8238 mounting kit - installed on H8238 | |
| AH22 | RS-485 Terminator, 100 Ohm 2-wire | |
| AH23 | H8400 Series DIN rail mounting kit |