The versatile PD Digital Pressure Gauge can be used with any gas, liquid, or solid that is compatible with 17-4 stainless steel. The one-piece construction employs no silicone, oil, welds, O-rings, or seals, making it the ideal universal pressure measurement device. The large LCD display shows the selected scale, as well as the maximum and minimum pressure. All functions are easily controlled from the four panel push buttons located below the display.
APPLICATIONS- Pump Inlet/Outlet and Compressors
- Inert Gas Pressure Measurement
- Hydraulic/Pneumatic Systems
- Energy and Fluid Management
- Refrigeration Equipment/Fluids/Test Stands
- Industrial Process Control
- Vacuum Chambers
- Lab and Research
- Irrigation
Features- High accuracy
- Rugged one-piece construction...provides long product life
- Large LCD display...clear readings at a distance
- Switch-selectable scales...for maximum resolution and versitility
- Pushbutton zero...maximizes accuracy and prevents callbacks
- NEMA 4/IP65 housing
- Input Power 9 volt alkaline battery
- Pressure -14.7 to 1000 psig
- Measurement Units* PSI, bar, kg/cm2, atm, in. of Hg, in. of H2O* (selectable)
- Accuracy** <± 0.5% BFSL Stability (1 yr) ±0.25% of FS Typical
- Overange Protection 2x Rated Pressure
- Burst Pressure 5x Rated Pressure or 5000PSI, whichever is less
- Pressure Cycles > 100 Million
Temperature Ranges:- Media -55° to 125°C (-65° to 257°F)
- Operating (Ambient) -10° to 70°C (15° to 158°F)
- Storage -15° to 85°C (5° to 185°F)
Thermal Limits:- Compensated Range 0° to 55°C (32° to 130°F)
- TC Zero <±1.5% of FS
- TC Span <±1.5% of FS
- Connection ¼” NPT Male
- Update Rate 2 times per second
- Automatic Power Off 1 hour
- Battery Life 4000 Operating Hours (typical)
- Housing NEMA 4, IP65, Polycarbonate
*inches H2O units available on =250psi range devices only**Accuracy includes non-linearity, hysteresis, and non-repeatability, measured at 25°C(77°F)Note: Select a loop power supply and total loop resistance so that when the loop current is 20mA, the gauge will have at least 7.5VDC at its terminals