H8932 - Veris Industries

H8932

- $900.00 EA

Quantity:

H8932 Datasheet

H8932 Install

Overview
Series Specifications

The H8932 serves as the display tool for Modbus data. The H8932 is compatible with the H704, H663, H8238, and Enercept® devices. It is available with no box for fast mounting to a panel.
APPLICATIONS

Allocating load-based costs
Managing loads
Overload protection
Collecting energy data
Tenant submetering

Easy to use

Large 1" x 4" backlit LCD with adjustable brightness control for easy viewing
Multi-color LED shows alarm status at a glance
Pass-through communications to other Modbus® devices
Easy keypad setup
Monitor a variety of Veris power transducers from a single location

AC Power Source Dedicated 120VAC, line-to-neutral. Fused. 200mA@250Vx20mm Fast-Blo
AC Power Voltage Tolerance (90-132VAC) for 120V
AC Power Frequency 50/60 Hz
AC Power Termination 2-position Euro-style pluggable connector (max wire size 12 gauge)
Alternate DC Power Source 12VDC, 300mA unfused (Auxiliary input disabled if line connected)
Operating Temperature Range 0° to 50°C (32° to 122°F); <95%RH, non-condensing
Storage Temperature Range -20°C to 70°C (-4° to 158°F)

Upstream Network Communications:

Interface RS-485, RS-232
Protocol Modbus RTU
Baud Rate UI-selectable 2400, 4800, 9600, 19200
Parity UI-selectable NONE, ODD, EVEN
Communication Format 8-data-bits, 1-start-bit, 1-stop-bit
RS-485 1/4-load transceivers; Duplex is UI-selectable 2-wire or 4-wire;5-position Euro-style pluggable connector
RS-232 DCE, no handshaking
DB-9 connection; pin 2: Transmitted Data from H8936; pin 3: Received Data into H8936; pin 5: Ground

Downstream Network Communications:

Interface RS-485
Protocol Modbus RTU
Duplex UI-selectable 2-wire or 4-wire
Load 1/4-load transceivers
Baud Rate UI-selectable 2400, 4800, 9600, 19200
Parity UI-selectable NONE, ODD, EVEN
Communication Format 8-data-bits, 1-start-bit, 1-stop-bit
Termination 5-position Euro-style pluggable connector UI-Switch Inputs Number/Function Four (METER, UP, DOWN, SELECT)

Auxiliary Input (Remote Alarm):

Type Contact closure or pull-to-ground (10mA max)
Isolation Optical to 2500VAC
Sense UI-selectable N.O. or N.C.; (i.e. Closed = Alarm or Open = Alarm)

LCD:

Size 1” x 4” visible area, 2 lines x16 characters per line
Backlight Green, UI-adjustable brightness in 10 steps