The Hawkeye Relay Combination Series is the ideal solution for the automation installer. These units combine a current switch and relay into a single package, reducing the space required for total control of fans and pumps. The current switch and relay operate independently of one another. These devices allow start/stop control and status monitoring with one device instead of two.
APPLICATIONS- Starting/stopping and monitoring positive status of motors
- Detecting belt loss and coupling shear
Combines command relay and fan/pump status sensor in a single, easy to install unit- Reduces number of components installed – fits better in small starter enclosures
- Detect belt loss and motor failure...ideal for fan and pump status
Now, one device does the job of two- Reduced charges from electrician
- Relay and status LEDs for easy setup
- Polarity insensitive status output
- Adjustable setpoint for current sensor status
- 5-year limited warranty
- Sensor Power Induced from monitored conductor
- Insulation Class 600VAC RMS
- Frequency Range 50/60Hz
- Temperature Range -15° to 60°C (5° to 140°F)
- Humidity Range 10-90% RH, non-condensing
- Hysteresis 10% Typical
- Terminal Block Maximum Wire Size 14 AWG
- Terminal Block Torque (nominal) 4 in-lbs (0.45 N-m)
- Agency Approvals UL 508 open device listing
Do not use the LED status indicators as evidence of applied voltage.