Hawkeye 609 devices are high performance current switches, ideal for line voltage loads. The devices are powered by the current being monitored.
APPLICATIONS- Detecting belt loss, coupling shear, and mechanical failure
- Verifying lighting circuit and other electrical service run times
- Monitoring status of industrial process equipment
- Monitoring status of critical motors (compressor, fuel, etc.)
High performance current switches- Small in size to fit easily inside small starter enclosures
- Removable mounting bracket optimizes field versatility
- Status LEDs for easy setup and local indication
Monitor status of fans, pumps & electrical loads- Detect belt loss and mechanical failure...ideal for fan/pump status monitoring
- Easier to install than differential pressure switches...no additional wiring needed
- Adjustable trip point
- 100% solid state...no moving parts to fail
- 5-year limited warranty
- Sensor Power Induced from monitored conductor
- Insulation Class 600VAC RMS
- Frequency Range 50/60 Hz
- Temperature Range -15° to 60°C (5° to 140°F)
- Humidity Range 10-90% RH, non-condensing
- Hysteresis 10% (typical)
- Terminal Block Maximum Wire Size 14 AWG
- Terminal Block Torque (nominal) 4 in-lbs (0.45 N-m)
- Agency Approvals UL 508 open device listing CE:EN61010-1:2001-02, CAT III, deg. 2, basic insulation
Do not use the LED status indicators as evidence of applied voltage