The H280 load status switch monitors both voltage and current on manually-switched loads (e.g., lights/fans in bathrooms). This device provides status monitoring for loads that are not, or cannot be, controlled by a control system. The H280 also saves cost by eliminating the need to connect a digital output to prove status.
APPLICATIONS- Lighting
- Bathroom Fans
- Sump Pumps
- Traffic Lights
- Roadside Lighted Areas (e.g., bus stations)
- Parking Lots/Garages
Features- Wide voltage range (110-277VAC)...easy to use in many applications
- Low current threshold (100mA) offers great sensitivity for those small loads
- Nipple mount housing can be connected to any 1/2” conduit knockout for installation versatility
- Dual-color LED for easy visual inspection...control system is not required
- Isolated status output protects control system
- Sensor Power Line powered
- Operating Temperature -15° to 60°C (5° to 140°F)
- Operating Humidity 10-90% RH, non-condensing
- LED Status GREEN LED=status normal; RED LED=status alarm
- Frequency 50/60 Hz
Wire Specifications:- Lead Length 14”(356mm) min.
- Gauge UL1015; Neutral: 18AWG; Line: 12AWG; Status: 16AWG
- Agency Approvals UL 508 enclosed device listing
Do not use the LED status indicators as evidence of applied voltage.